OREI HD12-EX165-K: 1X2 HDMI EXTENDER SPLITTER UPTO 165
The OREI HD12-EX165-K HDMI extender splitter allows you to transmit HDMI audio/video signals over Cat6/7 cable along with maintaining original audio/video quality to up to 2 displays remotely. It supports up to 1080p resolution and extends the transmission distance up to 165 feet (50 meters).
Durable and easy to set up and operate without any software installations. Ideal for businesses, churches, test bench facilities, data centres and help desks to duplicate HDMI signals at long range.
HDMI Loop-out - Connect HDMI display to the transmitter (sender unit) for an output to local display at the source.
IR control - enables source device to recognize remote commands from remote display side.
Power Over Cable - only use one included power adapter at transmitter (sender) side to power all the receivers
EDID Management - multiple EDID configuration options to select the perfect resolution and audio output settings for your connected displays.
Key Features:
- Distribute 1 HDMI source to 2 HDMI displays over cat6 network cable simultaneously
- 1 in 2 out splitter receivers with power over cable feature - no adapter needed to power the receivers
- Cat6 HDMI transmitter is equipped with 2 port Cat6 output
- 1 additional HDMI output to connect local HDMI display or monitor
- EDID management control on transmitter
- IR kit (20~60KHz) to receive the IR remote control commands from the receiver end to transmit back to the transmitter side to control to the HDMI source remotely
- Plug & play setup without any software installation
- Compatible with Cat6/7 ethernet network cables
- Use single UTP LAN cable (CAT5E/6) to substitute HDMI cable to achieve long distances transmission
- Up to Full HD resolution 1920×1080@60hz, ideal solution for HDMI exhibition, video conference, meeting rooms and bars
- This unit requires only one power adapter to work
- AUDIO AND VIDEO
- Transmitter:
- INPUT PORTS:
- 1 × HDMI IN [Type A, 19-pin female]
- OUTPUT PORTS:
- 1 × HDMI OUT [Type A, 19-pin female]
- 2 x CAT OUT [RJ45]
- Controls:
- 1 × IR OUT [3.5mm Stereo Mini-jack]
- 1 x EDID DIP switch [4-pin]
- 1 x UPDATE [Micro USB]
- INPUT PORTS:
- Receiver:
- INPUT PORTS:
- 1 x IR IN [3.5mm Stereo Mini-jack]
- 1 x CAT IN [RJ45, 8-pin female]
- OUTPUT PORTS:
- 1 x HDMI OUT [Type A, 19-pin female]
- INPUT PORTS:
- Transmitter:
- COMPLIANCES
- HDMI Compliance: HDMI 1.4
- HDCP Compliance: HDCP 1.4
- SUPPORTED CAT CABLES
- CAT5e, CAT6, CAT7: We recommend you to use shielded CAT6 cables & High-Quality HDMI Cables for optimum performance
- EXTENDING DISTANCE
- 1080p@60Hz: 165 Feet
- VIDEO OUTPUT
- Video Bandwidth: 297MHz/10.2Gbps
- Video Resolutions: 480i ~1080p50/60Hz, 4Kx2K@30Hz (4:4:4)
- Color Space: RGB, YCbCr_4:4:4/4:2:2. YUV_4:2:0
- Color Depth: 8-bit, 10-bit, 12-bit (1080p@60Hz); 8-bit (4K30Hz)
- CEC, EARC, POC/POE, IR, DOWNSCALER, KVM, OVER IP, HDBASET, RS-232 SUPPORT
- CEC Function: No
- ARC Function: No
- USB KVM Function: No
- PoC/PoE Function: Yes
- IR Controller: Yes
- Downscaler Function: No
- Over Network/IP Function: No
- HDBaseT Function: No
- RS-232 Function: No
- LOOP-OUT/LOCAL PORT
- Has loop out port: Yes
- Number of Loop out ports: 1
- SWITCHES
- EDID Management: The EDID switch allows for EDID learning or to pre-set an EDID to encourage a “handshake” between the display and source
- EQ Dip Switches: Adjust the EQ dip switches according to the length of the CAT6 cable as shown in the manual
- Arc: No
- AUDIO OUTPUT
- HDMI Audio Formats:LPCM 7.1CH, Dolby True HD, and DTS-HD Master Audio
- SIGNALS
- TMDS Signals: -
- DDC Signals: -
- Maximum Pixel Clock: -
- DIMENSIONS & WEIGHT
- Transmitter:
- Height: 18mm
- Width: 175mm
- Depth: 82mm
- Weight: 366g
- Receiver:
- Height: 16.5mm
- Width: 79.5mm
- Depth: 69mm
- Weight: 130g
- Transmitter:
- PROTECTION
- Operation Temperature: 0°C ~ 40°C / 32°F ~ 104°F
- Storage temperature: -20°C ~ 60°C / -4°F ~ 140°F
- Relative Humidity: 20~90% RH (Non-condensing)
- Electrostatic Protection: Human body model—±8kV (Air-gap discharge) & ±4kV (Contact discharge)
- ESD Protection: Human body model—±8kV (Air-gap discharge) & ±4kV (Contact discharge)
- RJ-45 CONNECTOR TYPE
- WE/SS 8P8C
- POWER
- Power Consumption (Max): 5.4W
- Power Supply:12V/1A DC
- PHYSICAL PROPERTIES
- Color: Black
- Housing: Metal Enclosure
- Processing Technology:-
- Finishing:-
- 1 × HDMI 1×2 Splitter
- 2 × CAT Receiver
- 1 × IR Blaster Cable (1.5 meters)
- 2 × IR Receiver Cable (1.5 meters)
- 2 × Mounting Ear
- 1 × 12V/1A DC Locking Power Adapter
- 4 × Machine Screw (KM3*4)
- 1 × User Manual
- 1 year manufacturer's warranty
Request a Quote
1x2 HDMI Extender Splitter Over CAT6/7 Up To 165 Ft- Loop-Out, IR Control & EDID (HD12-EX165-K)
JOIN OUR MAILING LIST
It’s fast, Easy and Free!!!
©2024 Bombay Electronics. All Rights Reserved.